| |
Gas Handling Equipment:
Laboratory Gas Generators
Hydrogen Generator
Zero-Air & Ultra-Zero Air
Air Compressor Stations
UHP Nitrogen Generator
High Flow Nitrogen
TOC & FTIR Generators
Calibration
Gas Generator
NanoCHEMĀ® Gas Purification Systems
SEMI-GASĀ® Special Delivery Equipment
Gas Delivery Systems
Gas Pressure Regulators
Gas Filters and Purifiers
Gas Flow Measurement & Control
Gas Detection Equipment
Gas Control Valves
Gas Management Accessories
Helium Recovery Solutions
Gas Reference Information
Request your FREE Complete Catalogue/Reference Guide
|
TOC
Air Generator:
|
Chrysalis TOC Air Generator is designed to provide a
continuous supply of carbon dioxide free (CO2 free) air
suitable for use as purge gas with TOC analyzers. Using
pressure-swing adsorption (PSA), the TOC Air Generator removes CO2
to < 1 ppm and moisture to -100oF dewpoint. The
system requires a source of oil-free compressed air.
Features:
-
Flow
rate: 9.1 L/min at 120 psig inlet pressure; 2.1 L/min at 60 psig
inlet pressure
-
CO2
levels: < 1 ppm
-
Moisture level: < 1 ppm (-100oF dewpoint)
-
Compact size conserves space
-
Wall-mountable design conserves lab bench space
-
Continuous self-regenerative operation
-
Regulator/Filter with gauge installed on outlet
-
No
moving parts requiring maintenance
-
Operating pressure: 60 - 120 psig
-
1
year warranty (or 4,000 hours of operation)
Find out more
|

TOC Air Generator
(CO2-free) |
|
FT-IR Air Generators:
|
|
Chrysalis FT-IR Air Generator is designed to provide
a continuous supply of carbon dioxide free (CO2 free) air
suitable for use as purge gas and air bearing gas for FT-IR
Spectrometers. CO2 free air enables lower
background and improved signal-to-noise ratios. Using
pressure-swing adsorption (PSA), the TOC Air Generator removes CO2
to < 1 ppm and moisture to -100oF dewpoint. The
system requires a source of oil-free compressed air.
Features:
-
3
models available: PG19 (19 L/min); PG28 (28 L/min); and, PG80
(80 L/min)
-
Flow
rate Model PG19: 19 L/min at 120 psig inlet pressure; 4
L/min at 60 psig inlet
-
Flow
rate Model PG28: 28 L/min at 125 psig inlet pressure; 7
L/min at 60 psig inlet
-
Flow
rate Model PG80: 80 L/min at 125 psig inlet pressure; 4
L/min at 60 psig inlet
-
CO2
levels: < 1 ppm
-
Moisture level: < 1 ppm (-100oF dewpoint)
-
Compact size conserves space
-
Wall-mountable design conserves lab bench space
-
Continuous self-regenerative operation
-
Regulator/Filter with gauge installed on outlet
-
No
moving parts requiring maintenance
-
Operating pressure: 60 - 125 psig
-
1
year warranty (or 4,000 hours of operation)
Find out more
|

FT-IR Air Generator
(CO2-free) |
|
|